Ratio to Percentage Calculator
Last updated: November 14, 2026
Direct answer. Part-to-whole: Percentage = A ÷ B × 100. 3 out of 4 is 75%. Part-to-part: first share = A ÷ (A + B) × 100. A 3:4 split is 3/7 ≈ 42.86% and 4/7 ≈ 57.14%.
A ratio can mean two different things. “3 out of 4” is a part-to-whole comparison: 3 is 75% of 4. “3 to 4” as two parts of a mix is a part-to-part split: 3 and 4 are 3/7 and 4/7 of the total, or about 42.86% and 57.14%. This calculator keeps those modes separate.
Ratio to Percentage Calculator
Convert a ratio into a percentage. Use part-to-whole when the second number is the total (3 out of 4). Use part-to-part when both numbers are shares (3:1).
Result
Key takeaways
- 3 out of 4, as a part of a whole, is 75%.
- A 3:4 part-to-part mix is about 42.86% and 57.14%, because the total of the parts is 7.
- The two modes are not interchangeable.
- A whole or a total of 0 cannot be converted.
How to use this calculator
- Choose part-to-whole or part-to-part.
- Enter the first term and the second term.
- Read the percentage, and in part-to-part mode, the complementary share as well.
The formula
Part-to-whole divides the part by the whole. Part-to-part divides each term by the sum of the terms. Units of A and B must match; the result is a percent.
Worked examples
| Mode | A | B | Result |
|---|---|---|---|
| Part-to-whole | 3 | 4 | 75% |
| Part-to-part | 3 | 4 | 42.86% and 57.14% |
| Part-to-whole | 1 | 2 | 50% |
3 ÷ 4 × 100 = 75%.
Total parts = 7. First share = 3 ÷ 7 × 100 ≈ 42.86%. Second share = 4 ÷ 7 × 100 ≈ 57.14%.
When this is useful in the United States
A U.S. recipe or mix-ratio on a chemical label that says 3:4 parts is a part-to-part problem, not “3 is 75% of 4.”
A free-throw record of 3 makes in 4 attempts is part-to-whole: 75%.
Survey results written as “3 to 4 in favor” may mean 3 yes votes and 4 no votes (part-to-part) or may be loose language for 3 out of 4. Read the counts before you pick a mode.
Common mistakes
- Treating every colon as part-to-whole. 3:4 is often two parts, not 75%.
- Reversing A and B in a part-to-whole problem and reporting 133.33% when you meant 75%.
- Letting A + B equal 0 in part-to-part mode.
Ratios have no built-in unit, but A and B still have to describe the same kind of quantity: cups and cups, votes and votes, or dollars and dollars. A 3:4 ratio of width to height is part-to-part. A test score of 3 correct out of 4 questions is part-to-whole. If a word problem does not make the whole explicit, write the whole down before you choose a mode. Word problems in U.S. textbooks switch freely between “3 out of 4,” “3:4,” and “3 to 4.” The punctuation is not a reliable signal by itself. Look for whether a whole is named (“3 of 4 attempts,” “3 of every 4 customers”) or whether two parts are being mixed (“3 parts water to 4 parts concentrate”). Once you know which situation you have, the formulas on this page are ordinary part-to-whole or part-to-part arithmetic. If a third part appears, the two-term tool is no longer enough: add all the parts and divide each one by that total. The fraction-to-percentage calculator is the closest sibling for a single fraction A/B. If a label gives a ratio and a total volume, you can turn the part-to-part percents into amounts by multiplying each share by the total. This calculator stops at the percents so the two modes stay easy to check. Convert to amounts only after you know which mode you used. Read the result units carefully before you copy them into a spreadsheet, a syllabus, or a checkout estimate. The calculator shows the working so you can compare each step with a hand calculation. If a result looks off, confirm that every input uses the unit labeled on the field, then use Reset and try the built-in example. This page does not invent official rates, cutoffs, or statistics, and it does not store the numbers you type.
Frequently asked questions
What percent is 3 out of 4?
75%, when 3 is the part and 4 is the whole.
What percent is a 3:4 mix?
About 42.86% for the first part and 57.14% for the second, because the parts add to 7.
Is this the same as a fraction-to-percentage conversion?
Part-to-whole mode is the same math as converting the fraction A/B to a percent. Part-to-part mode is not.
Can I use more than two terms?
This tool takes two terms. For three or more equal-type parts, divide each part by the sum of all parts by hand, or split the work into pairs only if that matches the question.
