Skip to content

GPA and Letter Grade Converter

Last updated: November 14, 2026

Direct answer. On the default scale used here, 95% falls in the A band (93% to 100%) at 4.0 GPA. A 4.0 GPA maps back to that same 93%–100% band, whose midpoint is 96.5% and is a reference only. Edit the scale if your school uses different cutoffs.

U.S. high schools and colleges map percentages to letter grades and GPA points in different ways. There is no single official national scale. This converter starts with one common plus-minus scale — for example 93% to 100% as an A at 4.0 — and lets you edit every row to match a syllabus. A GPA does not convert to one official percentage; it converts to a band, with a midpoint shown only as a reference.

GPA, Percentage, and Letter Grade Converter

Map a percentage to a letter and a GPA, or a GPA to a percentage band. The default is one common U.S. plus-minus scale. Schools set their own cutoffs — edit the rows to match your syllabus.

Default scale (edit as needed). A 4.0 here is the band 93%–100%, not every percentage in that band.

Key takeaways

  • Letter and GPA scales vary by school. Edit the table to match your syllabus.
  • Default example: 95% is an A at 4.0, on a band from 93% to 100%.
  • GPA to percentage is a band, not a single official percent. The midpoint is only a reference.
  • This is not a transcript official conversion and does not replace a registrar’s chart.

How to use this calculator

  • Choose percentage-to-letter or GPA-to-band.
  • Enter a percentage or a GPA.
  • Edit the scale rows if your school differs, then read the letter, GPA points, and band.

The formula

A percentage is mapped to the first scale row whose minimum and maximum include that percentage. A GPA is matched to the row with the same GPA points. Units are percent for marks, letter labels, and GPA points on the 4.0-style scale you entered.

A percentage is mapped to the first scale row whose minimum and maximum include that percentage. A GPA maps to that row’s percent band; the midpoint is (minimum + maximum) ÷ 2 and is a reference only.

Worked examples

Default U.S. plus-minus scale used on this page (editable; schools vary)
LetterMinimum %Maximum %GPA
A931004.0
A-9092.9993.7
B+8789.9993.3
B8386.9993.0
B-8082.9992.7
C+7779.9992.3
C7376.9992.0
C-7072.9991.7
D+6769.9991.3
D6366.9991.0
D-6062.9990.7
F059.9990.0
A 95% on the default scale

95 falls between 93 and 100, which this scale labels A at 4.0.

A 4.0 GPA on the default scale

4.0 matches A, a band from 93% to 100%. The midpoint 96.5% is only a reference, not an official converted mark.

When this is useful in the United States

A student whose syllabus publishes cutoffs can edit the rows and then convert a course percentage to the letter the instructor said they would use.

A family used to a 90% = A scale should change the A minimum before trusting the letter. Many U.S. schools use 90, 93, or 94 as an A cutoff.

Transfer or international comparisons sometimes ask for a percentage after a GPA. This tool can only return a band on the scale you entered, not a university-official equivalent.

Common mistakes

  • Treating the midpoint as the official percentage equivalent of a GPA.
  • Leaving the default scale in place when your handbook uses different cutoffs.
  • Using this converter as a weighted GPA across several courses. That needs credit hours and official quality points from the school.

Plus-minus cutoffs, A+ rows, and 4.3 or 5.0 scales are all possible in the United States. Add or remove rows until the table matches the document you were given. If two rows overlap, the first matching row wins, so keep bands exclusive. If a GPA does not match any row exactly, the converter will say so rather than invent a letter. Do not cite this default table as if it were a national standard. If your school publishes a chart that differs in even one cutoff, edit that row before you convert a borderline mark such as 92.9% or 93.0%. A one-tenth difference in the cutoff is the difference between an A and an A- on the default table, and that is exactly why the table is editable. Weighted GPAs that give extra points for honors or AP courses will not match this simple 4.0-style table until you add those extra points to the scale yourself, or until you convert an already-unweighted GPA. This page does not invent an honors adder. It only uses the rows you leave in the table. When a form asks for a single percentage equivalent of a GPA, and your school has not published one, the honest answer is the band, not the midpoint alone. You can report both: the letter, the band, and the midpoint labeled as a reference.

Frequently asked questions

What letter is 95% on this page?

On the default scale, 95% is an A at 4.0. Your school may differ; edit the scale if it does.

Can I convert a 4.0 GPA to a single percentage?

Not officially. On the default scale a 4.0 is the 93%–100% band. The 96.5% midpoint is only a reference.

Does this replace the GPA calculator already on the site?

No. /gpa-calculator/ is unchanged. This page converts a percentage or GPA through an editable letter scale.

Is this an official U.S. Department of Education scale?

No. It is a common plus-minus pattern provided as a starting point, and it is editable.

Scroll to Top